Sign In | Join Free | My ccnmag.com
China ShenZhen Vector Technology Co., Ltd. logo
ShenZhen Vector Technology Co., Ltd.
More Flexible, More Accurate
Verified Supplier

1 Years

Home > Closed Loop Servo System >

Pulse Analog 1.5kw AC Servo Control System For Sewing Machine

ShenZhen Vector Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Pulse Analog 1.5kw AC Servo Control System For Sewing Machine

  • 1
  • 2

Brand Name : Vector

Model Number : VEC-VC1-00623MC-M-E /130MB-1R525A23F-CF2

Certification : CE

Place of Origin : China

MOQ : 1 kit

Price : To Be Discussed

Payment Terms : L/C, T/T, Western Union

Supply Ability : 500-1000 kits /Month

Delivery Time : 5-8 work days

Packaging Details : 375*290*155mm, 280*208*112mm

Phase : Three Phase

Voltage : 220V

Model : VEC-VC1-00623MC-M-E /130MB-1R525A23F-CF2

Usage : Sewing Machine

Certifictaes : CE

Encoder : 2500 pulse incremental + Hall encoder;

Communication Protocols : Modbus/CANopen/EtherCAT

Power : 1.5KW

Contact Now

220V 1.5kw Pulse/Analog AC Servo Driver System For Sewing Machine


Pulse/Analog AC Servo Driver System
AC Power 1.5KW
Three Phase 220V
Modbus / CanOpen / EtherCAT
Location / Speed / Torque Control Mode

2500 pulse incremental + Hall encoder;

Products Features

Product NamePulse/Analog AC Servo Driver System
BrandVector
Model No.VEC-VC1-00623MC-M-E /130MB-1R525A23F-CF2
Power41.5KW
Voltage220V
PhaseThree Phase
Rated Current6A
Communication ProtocolsModbus/CANopen/EtherCAT
Encoder2500 pulse incremental + Hall encoder;

VoltageControl ModeSingle-phase / three-phase full-controlled rectification
SVPWM modulation
EncoderEncoder Feedback2500 pulse incremental + Hall encoder;
2500 pulse incremental;
17bit Tamagawa absolute encoder;
23bit Tamagawa absolute encoder;
24bit Nikon absolute encoder;
Pulse Command InputPulse TypeDifferential input,Open collector
Frequency RangeDifferential input:0-500kHz,pulse width greater than 1us
Open collector: 0-300kHz,pulse width greater than 2.5us
Pulse Modepulse + direction; AB pluses; CW+CCW;
Analog InputVoltage Range-10V to 10V
Input Impedance10kΩ
Maximum Frequency1.5kHz
DI/DO Interface TypeNPN/PNP
CommunicationModbus/CANopen/EtherCAT
Location ModeCommand Input MethodPulse Command
Internal Planning Position

Plan by target position, speed, acceleration and deceleration
time

Trapezoidal speed curve
Cubic speed curve
Absolute / relative command mode
Instruction Smoothing ModeLow Pass Filtering / Median Filtering
Electronic Gear RatioN/M;(M=1~2147483647,N=1~2147483647)
Torque LimitInternal Torque Limit / Analog Torque Limit
Feedforward CompensationSpeed Feedforward / Torque Feedforward
Torque CompensationFixed Torque Compensation / Analog Torque Compensation /
Automatic Torque Compensation;
Speed Contol ModeCommand Input TypePulse Frequency / Analog / Internal Planning Speed
Speed Control Range1~max speed
Bandwidth1kHz
Torque LimitInternal Torque Limit / Analog Torque Limit
Instruction Smoothing ModeLow Pass Filtering / Median Filtering
Feedforward CompensationTorque feedforward
Torque CompensationFixed Torque Compensation / Analog Torque Compensation /
Automatic Torque Compensation;
Torque Control ModeCommand Input TypeInternal Torque Reference / Analog Control Torque
Torque CompensationFixed Torque Compensation / Analog Torque Compensation /
Automatic Torque Compensation;
Speed LimitInternal Speed Limit / Analog Speed Limit


Servo Drive model slecting:


Servo motor model slecting:



Installation Precautions

● Install the driver on a dry and sturdy platform. Maintain good ventilation and

heat dissipation during installation and maintain good grounding.

● Please install in the specified direction to avoid malfunction.

● When installing, please ensure that the servo driver is kept at a specified

distance from the inner surface of the cabinet and other machines, otherwise it may cause fire or malfunction.

Installation
Environment
Requirements
Atmospheric Pressure86~106kPa
Mbient Humidity0~55℃
Ambient Temperature0~90%RH
IP RatingIP20
Vibration0~4.9m/s^2

Operating precautions:


● in the test operation, in order to prevent accidents, please test the servo motor with no load

(not connected to the driver shaft), otherwise it may cause injury.

● when starting to operate on the supporting machine, set the user parameters that match the machine

in advance. If you start operation without parameter setting, it may cause mechanical loss or malfunction.

● to avoid accidents, install a limit switch or a stopper at the end of the movable part of the machine,

otherwise it will cause mechanical damage or injury.

● do not make extreme changes to the parameter settings, as this may result in

unstable operation, mechanical damage or injury.

●when the power is turned on or the power supply is cut off, the heat sink of the servo driver, external

braking resistor, motor, etc. may be in a high temperature state. Do not touch it, otherwise it may cause burns.

● when using a servo motor on the vertical axis, set a safety device to prevent the work piece from falling

under alarm, over travel, etc. In addition, please perform the servo lock stop setting when an over travel occurs,

otherwise the work piece may fall in the over travel condition.

● do not enter the operating range of the machine during operation, otherwise it will cause injury.

● do not touch the servo motor or the movable part of the machine during

operation, otherwise it will cause injury.

● please set up the safety system to ensure safety even in the event of a signal

line breakage. For example, when the positive over travel switch (P-OT) and negative over travel switch

(N-OT) signals are disconnected at the factory setting, they operate safely.

● be sure to set the servo OFF state when turning off the power.

● do not turn the power on/off frequently. After the actual operation starts, the power ON/OFF interval

should be more than 1 hour, otherwise the components inside the servo unit will be prematurely aged.

●when an alarm occurs, reset the alarm after the cause is removed and ensure

safety, and restart the operation, otherwise it may cause injury.

● do not use the brake of the brake motor for normal braking, otherwise it may

cause a malfunction.


Maintenance and inspection Precautions

● do not change the wiring while the power is on, otherwise it may cause electric shock or injury.

● please perform wiring or inspection by professional technicians, otherwise it

may cause electric shock or product failure.

● please check the power after the power is off for at least 5 minutes. Even if the power is turned off,

high voltage may remain inside the servo drive. Therefore, do not touch the power terminal within 5

minutes after the power is turned off, otherwise it may cause electric shock.

●when replacing the servo drive, please back up the servo driver user parameters to be replaced

before the replacement, and transfer the backup to the new servo drive, and then restart the operation,

otherwise the machine may be damaged.


Packing and Shipping

Packing details of Servo Drive
ProductsE1(3-6A)E2(7-12A)E3(16-27A)C015(32-38A)C022(45-60A)
Ctn. Size280*208*78280*208*112375*290*155440*296*288510*305*325
Packing details of Motion Controller
ProductsVA MotionVA ExpansionVE MotionVE Expansion(32)VE Expansion(76)
Ctn. Size176*165*78127*75*70144*128*69176*164*78

316*164*78


Delivery Time

Quantity1-5 kits50-100 kits200-500 kits
Delivery timeWithin 3 days5-10 days15-25 days

1. For small order we always can delivery out within 1 week.

2. Our products can be shippied via Air, Land or Sea.


Accessories


Accessory nameImage
Satandard Spare PartsPower terminalAdapt to E1,E2 structure drive
Cn3 encoder plugEncoder plug on the driver side
Cn4 control terminal plugInput/output signal terminals,user wiring
Encoder connection lineThe standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Power lineThe standard cable length is 3, 5, 8, 10, 13, 15 meters, according to customer
needs Provide independent connector
Drive monitoring lineConnect and adjust the software for remote monitoring and firmware update
Purchasing Spare PartsUSB to RS232 Adapter cableIf necessary, self purchase
Ethernet communication lineIf necessary, self purchase

CE Certificates

1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the

variable speed electric driver system), corresponding to the national standard GB12668.501-2013;

3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility

standards and its specific test methods), corresponding to the national standard GB12668.3-2012.

Our Team


Product Tags:

Sewing Machine AC Servo Control System

      

Analog 1.5kw AC Servo Control System

      

Pulse Analog 1.5kw AC Servo System

      
China Pulse Analog 1.5kw AC Servo Control System For Sewing Machine wholesale

Pulse Analog 1.5kw AC Servo Control System For Sewing Machine Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: ShenZhen Vector Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)